A shared bathroom refit replaces worn or failing bathrooms in an HMO with hard-wearing, easy-clean ones: good extraction, waterproofing, thermostatic showers and finishes that stand up to several users a day. For a house in Washington we start with a measured survey, check the council’s written HMO standards for the number of sharers, and then price each item separately.
- Area
- Tyne and Wear, England
- Postcodes
- DH4, NE37 and NE38
- Location
- 6 miles south-east of Newcastle upon Tyne
- Pricing region
- North East
What do shared bathroom and shower room refits in Washington involve?
- Wall panels or tiling
- Slip-resistant flooring
- Heated towel rail and lighting
- Thermostatic shower and bath or walk-in shower
- Tanking and waterproofing
Which rules apply in Washington?
The rules below are the England-wide position for this kind of work. Councils add their own standards and schemes on top, so we always check the address in Washington before we price.
- National rules ask for an adequate number of bathrooms, WCs and basins and suitably located kitchens; numeric ratios are set by each council.
- Councils assess hazards, including damp, mould and fire, under the HHSRS; revised regulations and guidance applied from 23 June 2026.
- Electrical installations must be inspected and tested at least every 5 years; remedial work is due within 28 days, or sooner if the report says so.
- Council standards often step up at 5 and 6 sharers, for example a separate WC at 5 and a second bathroom from 6.
How much do shared bathroom and shower room refits cost in Washington?
| Item | UK typical | Local guide | Per |
|---|---|---|---|
| Shared bathroom refit | £5,500 – £9,000 | £5,050 – £8,300 | bathroom |
| Ensuite shower room added to a bedroom | £4,000 – £10,000 | £3,700 – £9,200 | ensuite |
| Mould treatment and making good | £250 – £500 | £230 – £460 | room |
Use these as a starting point for budgeting. Access, condition and the council’s requirements in Washington can move the figure either way, which is why we quote after seeing the house.
How long does it take?
Typical time on site: 5–10 working days. We agree the programme with you before starting and send photo updates as the work progresses.
When do Washington landlords need it?
We usually get the call when:
- Before a licence inspection
- Too few bathrooms for the number of sharers
Questions about shared bathroom and shower room refits in Washington
Will you work while tenants use the house?
Yes, if another bathroom is available. We plan the work so the house is never left without one.
How far do you travel from Washington?
We cover the whole of Tyne and Wear and work UK-wide. For Washington the nearest towns on our list are Chester-le-Street (4 miles), Felling (4 miles), Houghton-Le-Spring (5 miles).
Where do I check the HMO rules for an address in Washington?
With the local council for the address. Councils in England can add additional licensing and Article 4 directions on top of the national rules. Check the council’s website for the exact address before you buy or start work.
How much do shared bathroom and shower room refits cost in Washington?
Our guide ranges for North East are in the table on this page, and the guide-price tool gives a figure for your house. A fixed written quote follows a free site visit.
Shared bathroom and shower room refits near Washington
- Chester-le-Street · 4 mi
- Felling · 4 mi
- Houghton-Le-Spring · 5 mi
- Hebburn · 5 mi
- Sunderland · 5 mi
- Gateshead · 5 mi
- All of Tyne and Wear
Other HMO services in Washington
- Ensuite installation in Washington
- Damp, mould and HHSRS repairs in Washington
- Communal kitchen refits in Washington
- Void and between-tenancy refurbs in Washington
- Full HMO refurbishment in Washington
- Layout changes and room reconfiguration in Washington
- Fire doors in Washington
- Student HMO refurbishment in Washington