Damp and mould in an HMO is usually caused by condensation, leaks or rising or penetrating damp, and often by a mix. Landlords in Ellesmere Port Town (CH2, CH34 and CH65) usually come to us with a council letter, a fire risk assessment or a house they have just bought. We price from whichever you have.
- Area
- Cheshire, England
- Postcodes
- CH2, CH34 and CH65
- Location
- 10 miles south of Liverpool
- Pricing region
- North West
What do damp, mould and HHSRS repairs in Ellesmere Port Town involve?
- Re-plastering and making good
- Insulation to cold spots
- Cause-finding survey with moisture readings
- Leak, gutter and roof repairs
- Mould treatment and stain-block
Which rules apply in Ellesmere Port Town?
Here is what usually applies to a Ellesmere Port Town job of this kind. It is general information rather than legal advice, and the council’s written HMO standards have the final detail.
- Councils assess hazards, including damp, mould and fire, under the HHSRS; revised regulations and guidance applied from 23 June 2026.
- Rented homes must currently meet at least EPC E, with a £3,500 spending cap. The government plans EPC C by October 2030, subject to legislation.
- Councils can fine up to £7,000 where a Category 1 hazard is not removed when it reasonably could have been.
How much do damp, mould and HHSRS repairs cost in Ellesmere Port Town?
| Item | UK typical | Local guide | Per |
|---|---|---|---|
| Damp repair, from a single wall to a whole house | £600 – £4,000 | £580 – £3,850 | job |
| Mould treatment and making good | £250 – £500 | £240 – £480 | room |
These are typical ranges including VAT, adjusted for North West, where costs run below the UK average. The fixed price for a house in Ellesmere Port Town follows a site visit.
How long does it take?
Most jobs of this kind take 2–10 working days. If a council deadline applies in Ellesmere Port Town, tell us at the first call so the programme is built around it.
When do Ellesmere Port Town landlords need it?
Landlords in Ellesmere Port Town most often ask us for this when:
- An HHSRS finding or council letter
- Recurring mould in bathrooms and bedrooms
Questions about damp, mould and HHSRS repairs in Ellesmere Port Town
What is HHSRS?
The Housing Health and Safety Rating System, the method councils in England and Wales use to assess hazards in homes, including damp and mould.
Do you cover all of Ellesmere Port Town?
Yes. We work across Ellesmere Port Town and the CH2, CH34 and CH65 postcode areas, plus the rest of Cheshire. Nearby places we also cover include Garston, Speke, Chester.
Does a shared house in Ellesmere Port Town need an HMO licence?
In England, a mandatory licence is needed for 5 or more people from 2 or more households. Smaller HMOs can need a licence where the council runs additional licensing, which is common in towns with many shared houses. Check the council’s website for the address.
How much do damp, mould and HHSRS repairs cost in Ellesmere Port Town?
Our guide ranges for North West are in the table on this page, and the guide-price tool gives a figure for your house. A fixed written quote follows a free site visit.
Damp, mould and HHSRS repairs near Ellesmere Port Town
- Garston · 4 mi
- Speke · 5 mi
- Chester · 6 mi
- Halewood · 6 mi
- Bebington · 7 mi
- Deeside · 8 mi
- All of Cheshire
Other HMO services in Ellesmere Port Town
- Shared bathroom and shower room refits in Ellesmere Port Town
- EPC and energy upgrades in Ellesmere Port Town
- Full HMO refurbishment in Ellesmere Port Town
- Void and between-tenancy refurbs in Ellesmere Port Town
- Licence condition and schedule-of-works in Ellesmere Port Town
- Communal kitchen refits in Ellesmere Port Town
- Rewires and EICR remedials in Ellesmere Port Town
- Ensuite installation in Ellesmere Port Town