An HMO fire alarm is an interlinked system of smoke and heat detectors that sounds everywhere in the house when one detector triggers. In Porthcawl, a town of about 16,000 people in Bridgend, the work is planned around the HMO rules for Wales and the council’s written HMO standards.
- Area
- Bridgend, Wales
- Postcodes
- CF33 and CF36
- Location
- 14 miles south-east of Swansea
- Pricing region
- Wales
What do fire alarm and detection systems in Porthcawl involve?
- Mains-wired interlinked smoke and heat detectors
- Carbon monoxide alarms where needed
- Survey and system design to the fire risk assessment
- User instructions and a logbook
- Detection in rooms, kitchens and escape routes as specified
Which rules apply in Porthcawl?
The rules below are the Wales-wide position for this kind of work. Councils add their own standards and schemes on top, so we always check the address in Porthcawl before we price.
- Fitness for human habitation rules require mains-powered, interlinked smoke alarms on every storey and CO alarms where there is a gas, oil or solid-fuel appliance.
- Councils such as Cardiff and Swansea run additional licensing for HMOs outside the mandatory scheme.
- An electrical inspection and test at least every 5 years, with the report given to the contract-holder within 14 days.
- Council HMO standards and the fire risk assessment set detection, fire doors and escape routes.
How much do fire alarm and detection systems cost in Porthcawl?
| Item | UK typical | Local guide | Per |
|---|---|---|---|
| Interlinked mains alarm system (Grade D type), small HMO (our estimate from installer guides) | £800 – £2,000 | £750 – £1,900 | house |
| Panel alarm system (Grade A type), larger HMO | £1,750 – £4,500 | £1,650 – £4,250 | house |
| Emergency light fitting, installed (our estimate) | £150 – £350 | £140 – £330 | fitting |
These are typical ranges including VAT, adjusted for Wales, where costs run below the UK average. The fixed price for a house in Porthcawl follows a site visit.
How long does it take?
Allow 1–4 working days on site for a typical job. Drawings, approvals and long-lead items such as kitchens or fire door sets are booked before we start.
When do Porthcawl landlords need it?
Typical reasons for this work in Porthcawl:
- No alarm, or battery-only alarms
- Adding rooms or converting to an HMO
Questions about fire alarm and detection systems in Porthcawl
Do you give a certificate?
Yes: design, installation and commissioning certificates for the system we fit.
Do you cover all of Porthcawl?
Yes. We work across Porthcawl and the CF33 and CF36 postcode areas, plus the rest of Bridgend. Nearby places we also cover include Pyle, Bridgend, Coity.
Where do I check the HMO rules for an address in Porthcawl?
With the local council for the address. Welsh councils set their own HMO standards and may run additional licensing. In Wales, changing a house to a C4 HMO always needs planning permission, so check planning first.
How much do fire alarm and detection systems cost in Porthcawl?
Our guide ranges for Wales are in the table on this page, and the guide-price tool gives a figure for your house. A fixed written quote follows a free site visit.
Fire alarm and detection systems near Porthcawl
- Pyle · 3 mi
- Bridgend · 6 mi
- Coity · 7 mi
- Maesteg · 9 mi
- Llantwit Major · 10 mi
- Briton Ferry · 12 mi
- All of Bridgend
Other HMO services in Porthcawl
- HMO fire safety upgrades in Porthcawl
- Escape routes, emergency lighting and fire stopping in Porthcawl
- Fire doors in Porthcawl
- Rewires and EICR remedials in Porthcawl
- Licence condition and schedule-of-works in Porthcawl
- House to HMO conversion in Porthcawl
- Damp, mould and HHSRS repairs in Porthcawl
- Sound insulation in Porthcawl