An HMO fire alarm is an interlinked system of smoke and heat detectors that sounds everywhere in the house when one detector triggers. For a house in Wellingborough we start with a measured survey, check the council’s written HMO standards for the number of sharers, and then price each item separately.
- Area
- Northamptonshire, England
- Postcodes
- NN8, NN9 and NN29
- Location
- 27 miles south-west of Peterborough
- Pricing region
- East Midlands
What do fire alarm and detection systems in Wellingborough involve?
- Panel systems for larger HMOs
- User instructions and a logbook
- Mains-wired interlinked smoke and heat detectors
- Carbon monoxide alarms where needed
- Survey and system design to the fire risk assessment
Which rules apply in Wellingborough?
The rules below are the England-wide position for this kind of work. Councils add their own standards and schemes on top, so we always check the address in Wellingborough before we price.
- Smoke alarms on every storey with living accommodation and CO alarms by fixed combustion appliances (other than gas cookers) are required by law.
- Mandatory HMO licence for 5 or more people in 2 or more households (since October 2018); councils can add additional licensing for smaller HMOs.
- Electrical installations must be inspected and tested at least every 5 years; remedial work is due within 28 days, or sooner if the report says so.
- The Fire Safety Order 2005 applies to the common parts of HMOs, enforced by the fire and rescue authority.
How much do fire alarm and detection systems cost in Wellingborough?
| Item | UK typical | Local guide | Per |
|---|---|---|---|
| Interlinked mains alarm system (Grade D type), small HMO (our estimate from installer guides) | £800 – £2,000 | £780 – £1,950 | house |
| Panel alarm system (Grade A type), larger HMO | £1,750 – £4,500 | £1,700 – £4,350 | house |
| Emergency light fitting, installed (our estimate) | £150 – £350 | £150 – £340 | fitting |
These are typical ranges including VAT, adjusted for East Midlands, where costs run below the UK average. The fixed price for a house in Wellingborough follows a site visit.
How long does it take?
Allow 1–4 working days on site for a typical job. Drawings, approvals and long-lead items such as kitchens or fire door sets are booked before we start.
When do Wellingborough landlords need it?
Typical reasons for this work in Wellingborough:
- No alarm, or battery-only alarms
- Adding rooms or converting to an HMO
Questions about fire alarm and detection systems in Wellingborough
Do you give a certificate?
Yes: design, installation and commissioning certificates for the system we fit.
How far do you travel from Wellingborough?
We cover the whole of Northamptonshire and work UK-wide. For Wellingborough the nearest towns on our list are Rushden (4 miles), Kettering (7 miles), Northampton (9 miles).
Where do I check the HMO rules for an address in Wellingborough?
With the local council for the address. Councils in England can add additional licensing and Article 4 directions on top of the national rules. Check the council’s website for the exact address before you buy or start work.
How much do fire alarm and detection systems cost in Wellingborough?
Our guide ranges for East Midlands are in the table on this page, and the guide-price tool gives a figure for your house. A fixed written quote follows a free site visit.
Fire alarm and detection systems near Wellingborough
- Rushden · 4 mi
- Kettering · 7 mi
- Northampton · 9 mi
- Corby · 13 mi
- Bedford · 15 mi
- Market Harborough · 15 mi
- All of Northamptonshire
Other HMO services in Wellingborough
- HMO fire safety upgrades in Wellingborough
- Escape routes, emergency lighting and fire stopping in Wellingborough
- Fire doors in Wellingborough
- Rewires and EICR remedials in Wellingborough
- Licence condition and schedule-of-works in Wellingborough
- House to HMO conversion in Wellingborough
- Communal kitchen refits in Wellingborough
- Small HMO conversions (3–6 sharers) in Wellingborough