An HMO fire alarm is an interlinked system of smoke and heat detectors that sounds everywhere in the house when one detector triggers. In Renfrew, a town of about 24,000 people, the work is planned around the HMO rules for Scotland and the council’s written HMO standards.
- Area
- Renfrewshire, Scotland
- Postcodes
- G14 and PA4
- Location
- 5 miles west of Glasgow
- Pricing region
- Scotland
What do fire alarm and detection systems in Renfrew involve?
- Survey and system design to the fire risk assessment
- Detection in rooms, kitchens and escape routes as specified
- Carbon monoxide alarms where needed
- Commissioning and certificate
- Panel systems for larger HMOs
Which rules apply in Renfrew?
Fire alarm and detection systems in Renfrew must satisfy national law for Scotland, the council’s written HMO standards and, where walls, drainage or fire separation change, the building rules. In short:
- Councils set HMO fire standards through licence conditions, often including emergency lighting in larger HMOs.
- Landlords must also be on the Scottish landlord register, renewed every 3 years.
- An EICR before the first let and at least every 5 years, with C1 and C2 items fixed, PAT testing of supplied appliances and RCD protection.
How much do fire alarm and detection systems cost in Renfrew?
| Item | UK typical | Local guide | Per |
|---|---|---|---|
| Interlinked mains alarm system (Grade D type), small HMO (our estimate from installer guides) | £800 – £2,000 | £760 – £1,900 | house |
| Panel alarm system (Grade A type), larger HMO | £1,750 – £4,500 | £1,650 – £4,300 | house |
| Emergency light fitting, installed (our estimate) | £150 – £350 | £140 – £330 | fitting |
These are typical ranges including VAT, adjusted for Scotland, where costs run below the UK average. The fixed price for a house in Renfrew follows a site visit.
How long does it take?
Allow 1–4 working days on site for a typical job. Drawings, approvals and long-lead items such as kitchens or fire door sets are booked before we start.
When do Renfrew landlords need it?
Typical reasons for this work in Renfrew:
- A licence condition or inspection finding
- Adding rooms or converting to an HMO
Questions about fire alarm and detection systems in Renfrew
Are battery smoke alarms enough?
For most HMOs, no. Interlinked mains-powered detection is usually expected so everyone is warned wherever the fire starts.
How far do you travel from Renfrew?
We cover the whole of Renfrewshire and work UK-wide. For Renfrew the nearest towns on our list are Clydebank (2 miles), Erskine (3 miles), Paisley (3 miles).
Does a shared house in Renfrew need an HMO licence?
Yes, if 3 or more people who are not from one or two families share amenities as their main home: every HMO in Scotland needs a licence from the council, lasting up to 3 years.
How much do fire alarm and detection systems cost in Renfrew?
Our guide ranges for Scotland are in the table on this page, and the guide-price tool gives a figure for your house. A fixed written quote follows a free site visit.
Fire alarm and detection systems near Renfrew
- Clydebank · 2 mi
- Erskine · 3 mi
- Paisley · 3 mi
- Bearsden · 4 mi
- Barrhead · 5 mi
- Glasgow · 5 mi
- All of Renfrewshire
Other HMO services in Renfrew
- HMO fire safety upgrades in Renfrew
- Escape routes, emergency lighting and fire stopping in Renfrew
- Fire doors in Renfrew
- Rewires and EICR remedials in Renfrew
- Licence condition and schedule-of-works in Renfrew
- House to HMO conversion in Renfrew
- Communal kitchen refits in Renfrew
- Layout changes and room reconfiguration in Renfrew