An HMO fire alarm is an interlinked system of smoke and heat detectors that sounds everywhere in the house when one detector triggers. Yeovil is 36 miles south of Bristol. We price fire alarm and detection systems there against England’s HMO rules and the council’s written HMO standards, so work is planned to the standard an inspection looks for.
- Area
- Somerset, England
- Postcodes
- BA20, BA22 and DT9
- Location
- 36 miles south of Bristol
- Pricing region
- South West
What do fire alarm and detection systems in Yeovil involve?
- Detection in rooms, kitchens and escape routes as specified
- Mains-wired interlinked smoke and heat detectors
- Commissioning and certificate
- User instructions and a logbook
- Survey and system design to the fire risk assessment
Which rules apply in Yeovil?
Fire alarm and detection systems in Yeovil must satisfy national law for England, the council’s written HMO standards and, where walls, drainage or fire separation change, the building rules. In short:
- Fire precautions follow a risk assessment; the LACORS Housing – Fire Safety guide (2008) is guidance, not law, but many councils base their standards on it.
- Under the Renters’ Rights Act, civil penalties reach £40,000 for offences such as running an unlicensed HMO.
- BS 7671, the wiring standard, calls for arc fault detection devices in HMOs on new socket circuits, such as rewires and consumer unit changes.
- Smoke alarms on every storey with living accommodation and CO alarms by fixed combustion appliances (other than gas cookers) are required by law.
How much do fire alarm and detection systems cost in Yeovil?
| Item | UK typical | Local guide | Per |
|---|---|---|---|
| Interlinked mains alarm system (Grade D type), small HMO (our estimate from installer guides) | £800 – £2,000 | £830 – £2,100 | house |
| Panel alarm system (Grade A type), larger HMO | £1,750 – £4,500 | £1,800 – £4,700 | house |
| Emergency light fitting, installed (our estimate) | £150 – £350 | £160 – £360 | fitting |
Use these as a starting point for budgeting. Access, condition and the council’s requirements in Yeovil can move the figure either way, which is why we quote after seeing the house.
How long does it take?
Typical time on site: 1–4 working days. We agree the programme with you before starting and send photo updates as the work progresses.
When do Yeovil landlords need it?
Typical reasons for this work in Yeovil:
- A licence condition or inspection finding
- Adding rooms or converting to an HMO
Questions about fire alarm and detection systems in Yeovil
Do you give a certificate?
Yes: design, installation and commissioning certificates for the system we fit.
Do you cover all of Yeovil?
Yes. We work across Yeovil and the BA20, BA22 and DT9 postcode areas, plus the rest of Somerset. Nearby places we also cover include Mendip, Bridgwater, Taunton.
Does a shared house in Yeovil need an HMO licence?
In England, a mandatory licence is needed for 5 or more people from 2 or more households. Smaller HMOs can need a licence where the council runs additional licensing, which is common in towns with many shared houses. Check the council’s website for the address.
How much do fire alarm and detection systems cost in Yeovil?
Our guide ranges for South West are in the table on this page, and the guide-price tool gives a figure for your house. A fixed written quote follows a free site visit.
Fire alarm and detection systems near Yeovil
- Mendip · 20 mi
- Bridgwater · 21 mi
- Taunton · 21 mi
- Weymouth · 24 mi
- Frome · 24 mi
- Burnham-on-Sea · 26 mi
- All of Somerset