- Nation
- England
- Pricing region
- North East
- Postcode areas
- NE, SR, DH
- Main towns
- Newcastle upon Tyne, Sunderland, South Shields, Gateshead, Washington
What do fire alarm and detection systems in Tyne and Wear involve?
- Maintenance and testing visits
- Detection in rooms, kitchens and escape routes as specified
- Carbon monoxide alarms where needed
- Commissioning and certificate
- Survey and system design to the fire risk assessment
- Mains-wired interlinked smoke and heat detectors
Which rules apply in Tyne and Wear?
- Smoke alarms on every storey with living accommodation and CO alarms by fixed combustion appliances (other than gas cookers) are required by law.
- Licences last up to 5 years and carry conditions on gas and electrical safety, alarms, room sizes and waste.
- BS 7671, the wiring standard, calls for arc fault detection devices in HMOs on new socket circuits, such as rewires and consumer unit changes.
- The Fire Safety Order 2005 applies to the common parts of HMOs, enforced by the fire and rescue authority.
- Under the Renters’ Rights Act, civil penalties reach £40,000 for offences such as running an unlicensed HMO.
Councils in England can add additional licensing and Article 4 directions on top of the national rules. Check the council’s website for the exact address before you buy or start work.
How much do fire alarm and detection systems cost in Tyne and Wear?
| Item | UK typical | Local guide | Per |
|---|---|---|---|
| Interlinked mains alarm system (Grade D type), small HMO (our estimate from installer guides) | £800 – £2,000 | £740 – £1,850 | house |
| Panel alarm system (Grade A type), larger HMO | £1,750 – £4,500 | £1,600 – £4,150 | house |
| Emergency light fitting, installed (our estimate) | £150 – £350 | £140 – £320 | fitting |
Typical time on site: 1–4 working days. For a figure for your house, try the guide-price tool.
Fire alarm and detection systems by town in Tyne and Wear
- Newcastle upon Tyne
- Sunderland
- South Shields
- Gateshead
- Washington
- Tynemouth
- Wallsend
- Newburn
- North Shields
- Whitley Bay
- Houghton-Le-Spring
- Felling
- Jarrow
- Gosforth
- Hebburn
Questions about fire alarm and detection systems in Tyne and Wear
What grade of fire alarm does an HMO need?
There is no single answer in law. Guidance links the grade and coverage to the size of the house and the risk, and your fire risk assessment and council will set it. We install to that specification.
How often should the alarm be tested?
Guidance usually asks for regular user tests and periodic servicing by a competent person. We can set up a maintenance schedule.
Do you carry out fire alarm and detection systems across Tyne and Wear?
Yes, across the whole of Tyne and Wear, including Newcastle upon Tyne, Sunderland, South Shields.
Who licenses HMOs in Tyne and Wear?
HMOs in Tyne and Wear are licensed by the local council for the address. Where an area has several councils, each runs its own licensing and planning policies.
Other HMO services in Tyne and Wear
- HMO fire safety upgrades in Tyne and Wear
- Escape routes, emergency lighting and fire stopping in Tyne and Wear
- Fire doors in Tyne and Wear
- Rewires and EICR remedials in Tyne and Wear
- Licence condition and schedule-of-works in Tyne and Wear
- House to HMO conversion in Tyne and Wear
- Loft conversions for extra rooms in Tyne and Wear
- Sound insulation in Tyne and Wear