A shared bathroom refit replaces worn or failing bathrooms in an HMO with hard-wearing, easy-clean ones: good extraction, waterproofing, thermostatic showers and finishes that stand up to several users a day. Landlords in High Peak (S33, SK17, SK22 and SK23) usually come to us with a council letter, a fire risk assessment or a house they have just bought. We price from whichever you have.
- Area
- Derbyshire, England
- Postcodes
- S33, SK17, SK22 and SK23
- Location
- 16 miles west of Sheffield
- Pricing region
- East Midlands
What do shared bathroom and shower room refits in High Peak involve?
- Extractor fan with humidistat or overrun
- Slip-resistant flooring
- Heated towel rail and lighting
- Separate WC where the ratio needs it
- Wall panels or tiling
Which rules apply in High Peak?
Here is what usually applies to a High Peak job of this kind. It is general information rather than legal advice, and the council’s written HMO standards have the final detail.
- Council standards often step up at 5 and 6 sharers, for example a separate WC at 5 and a second bathroom from 6.
- Councils can fine up to £7,000 where a Category 1 hazard is not removed when it reasonably could have been.
- BS 7671, the wiring standard, calls for arc fault detection devices in HMOs on new socket circuits, such as rewires and consumer unit changes.
How much do shared bathroom and shower room refits cost in High Peak?
| Item | UK typical | Local guide | Per |
|---|---|---|---|
| Shared bathroom refit | £5,500 – £9,000 | £5,350 – £8,750 | bathroom |
| Ensuite shower room added to a bedroom | £4,000 – £10,000 | £3,900 – £9,700 | ensuite |
| Mould treatment and making good | £250 – £500 | £240 – £480 | room |
Use these as a starting point for budgeting. Access, condition and the council’s requirements in High Peak can move the figure either way, which is why we quote after seeing the house.
How long does it take?
Typical time on site: 5–10 working days. We agree the programme with you before starting and send photo updates as the work progresses.
When do High Peak landlords need it?
Typical reasons for this work in High Peak:
- Too few bathrooms for the number of sharers
- Before a licence inspection
Questions about shared bathroom and shower room refits in High Peak
What stops mould in shared bathrooms?
Good extraction that keeps running after use, some background heat and finishes that do not trap moisture. We fit all three.
Which postcodes in High Peak do you work in?
All of them, including S33, SK17, SK22 and SK23, and the surrounding parts of Derbyshire.
Does a shared house in High Peak need an HMO licence?
In England, a mandatory licence is needed for 5 or more people from 2 or more households. Smaller HMOs can need a licence where the council runs additional licensing, which is common in towns with many shared houses. Check the council’s website for the address.
How much do shared bathroom and shower room refits cost in High Peak?
Our guide ranges for East Midlands are in the table on this page, and the guide-price tool gives a figure for your house. A fixed written quote follows a free site visit.
Shared bathroom and shower room refits near High Peak
- Buxton · 8 mi
- Hyde · 11 mi
- Hazel Grove · 11 mi
- Stalybridge · 12 mi
- Dukinfield · 12 mi
- Denton · 13 mi
- All of Derbyshire
Other HMO services in High Peak
- Ensuite installation in High Peak
- Damp, mould and HHSRS repairs in High Peak
- Communal kitchen refits in High Peak
- Void and between-tenancy refurbs in High Peak
- Full HMO refurbishment in High Peak
- Layout changes and room reconfiguration in High Peak
- House to HMO conversion in High Peak
- Escape routes, emergency lighting and fire stopping in High Peak