HMORefurbishment

Cumbria, England

Rewires and EICR remedials in Barrow in Furness

We carry out rewires and EICR remedials in Barrow in Furness, 32 miles north-west of Preston, working to the HMO rules that apply in England and to the council’s written HMO standards.

Electrician fitting a new metal consumer unit with RCBOs

HMO electrical works keep the wiring in a shared house safe and certificated. For a house in Barrow in Furness we start with a measured survey, check the council’s written HMO standards for the number of sharers, and then price each item separately.

Area
Cumbria, England
Postcodes
LA14
Location
32 miles north-west of Preston
Pricing region
North West

What do rewires and EICR remedials in Barrow in Furness involve?

  • Electrical installation certificates
  • EICR remedial works with confirmation
  • Extra sockets and USB points in rooms
  • Bathroom and kitchen circuits
  • Consumer unit replacement

Which rules apply in Barrow in Furness?

Here is what usually applies to a Barrow in Furness job of this kind. It is general information rather than legal advice, and the council’s written HMO standards have the final detail.

  • BS 7671, the wiring standard, calls for arc fault detection devices in HMOs on new socket circuits, such as rewires and consumer unit changes.
  • Under the Renters’ Rights Act, civil penalties reach £40,000 for offences such as running an unlicensed HMO.
  • Licences last up to 5 years and carry conditions on gas and electrical safety, alarms, room sizes and waste.

How much do rewires and EICR remedials cost in Barrow in Furness?

ItemUK typicalLocal guidePer
EICR, 5+ bedroom house£150 – £400£140 – £380inspection
Consumer unit upgrade with RCBOs and AFDDs£700 – £1,400£670 – £1,350house
Full rewire, 4–5 bedroom house£6,000 – £12,000£5,750 – £11,500house

These are typical ranges including VAT, adjusted for North West, where costs run below the UK average. The fixed price for a house in Barrow in Furness follows a site visit.

How long does it take?

Allow 1–7 working days on site for a typical job. Drawings, approvals and long-lead items such as kitchens or fire door sets are booked before we start.

When do Barrow in Furness landlords need it?

We usually get the call when:

  • An EICR with C1, C2 or FI items
  • Old wiring or an old fuse board

Questions about rewires and EICR remedials in Barrow in Furness

Do you issue certificates?

Yes: installation or minor works certificates and written confirmation of remedials, issued by the qualified electrician who did the work.

Which postcodes in Barrow in Furness do you work in?

All of them, including LA14, and the surrounding parts of Cumbria.

Where do I check the HMO rules for an address in Barrow in Furness?

With the local council for the address. Councils in England can add additional licensing and Article 4 directions on top of the national rules. Check the council’s website for the exact address before you buy or start work.

How much do rewires and EICR remedials cost in Barrow in Furness?

Our guide ranges for North West are in the table on this page, and the guide-price tool gives a figure for your house. A fixed written quote follows a free site visit.

Rewires and EICR remedials near Barrow in Furness

Other HMO services in Barrow in Furness

Planning HMO works?

Free site visit, then a fixed written quote itemised against your council’s standards.

CallGet a quote