An HMO fire alarm is an interlinked system of smoke and heat detectors that sounds everywhere in the house when one detector triggers. Landlords in Portslade (BN3, BN41 and BN42) usually come to us with a council letter, a fire risk assessment or a house they have just bought. We price from whichever you have.
- Area
- East Sussex, England
- Postcodes
- BN3, BN41 and BN42
- Location
- 3 miles west of Brighton
- Pricing region
- South East
What do fire alarm and detection systems in Portslade involve?
- Survey and system design to the fire risk assessment
- Commissioning and certificate
- Maintenance and testing visits
- Mains-wired interlinked smoke and heat detectors
- Detection in rooms, kitchens and escape routes as specified
Which rules apply in Portslade?
Here is what usually applies to a Portslade job of this kind. It is general information rather than legal advice, and the council’s written HMO standards have the final detail.
- The Fire Safety Order 2005 applies to the common parts of HMOs, enforced by the fire and rescue authority.
- Licences last up to 5 years and carry conditions on gas and electrical safety, alarms, room sizes and waste.
- BS 7671, the wiring standard, calls for arc fault detection devices in HMOs on new socket circuits, such as rewires and consumer unit changes.
- Smoke alarms on every storey with living accommodation and CO alarms by fixed combustion appliances (other than gas cookers) are required by law.
How much do fire alarm and detection systems cost in Portslade?
| Item | UK typical | Local guide | Per |
|---|---|---|---|
| Interlinked mains alarm system (Grade D type), small HMO (our estimate from installer guides) | £800 – £2,000 | £900 – £2,250 | house |
| Panel alarm system (Grade A type), larger HMO | £1,750 – £4,500 | £1,950 – £5,050 | house |
| Emergency light fitting, installed (our estimate) | £150 – £350 | £170 – £390 | fitting |
These are typical ranges including VAT, adjusted for South East, where costs run above the UK average. The fixed price for a house in Portslade follows a site visit.
How long does it take?
Allow 1–4 working days on site for a typical job. Drawings, approvals and long-lead items such as kitchens or fire door sets are booked before we start.
When do Portslade landlords need it?
Landlords in Portslade most often ask us for this when:
- A licence condition or inspection finding
- No alarm, or battery-only alarms
Questions about fire alarm and detection systems in Portslade
Are battery smoke alarms enough?
For most HMOs, no. Interlinked mains-powered detection is usually expected so everyone is warned wherever the fire starts.
Do you cover all of Portslade?
Yes. We work across Portslade and the BN3, BN41 and BN42 postcode areas, plus the rest of East Sussex. Nearby places we also cover include Hove, Brighton, Worthing.
Does a shared house in Portslade need an HMO licence?
In England, a mandatory licence is needed for 5 or more people from 2 or more households. Smaller HMOs can need a licence where the council runs additional licensing, which is common in towns with many shared houses. Check the council’s website for the address.
How much do fire alarm and detection systems cost in Portslade?
Our guide ranges for South East are in the table on this page, and the guide-price tool gives a figure for your house. A fixed written quote follows a free site visit.
Fire alarm and detection systems near Portslade
- Hove · 2 mi
- Brighton · 3 mi
- Worthing · 7 mi
- Rottingdean · 7 mi
- Burgess Hill · 9 mi
- Haywards Heath · 12 mi
- All of East Sussex
Other HMO services in Portslade
- HMO fire safety upgrades in Portslade
- Escape routes, emergency lighting and fire stopping in Portslade
- Fire doors in Portslade
- Rewires and EICR remedials in Portslade
- Licence condition and schedule-of-works in Portslade
- House to HMO conversion in Portslade
- Commercial and above-shop to HMO in Portslade
- Small HMO conversions (3–6 sharers) in Portslade