An HMO fire alarm is an interlinked system of smoke and heat detectors that sounds everywhere in the house when one detector triggers. Landlords in Burgess Hill (BN6, RH15 and RH17) usually come to us with a council letter, a fire risk assessment or a house they have just bought. We price from whichever you have.
- Area
- West Sussex, England
- Postcodes
- BN6, RH15 and RH17
- Location
- 9 miles north of Brighton
- Pricing region
- South East
What do fire alarm and detection systems in Burgess Hill involve?
- Survey and system design to the fire risk assessment
- Detection in rooms, kitchens and escape routes as specified
- Carbon monoxide alarms where needed
- Mains-wired interlinked smoke and heat detectors
- Commissioning and certificate
Which rules apply in Burgess Hill?
The rules below are the England-wide position for this kind of work. Councils add their own standards and schemes on top, so we always check the address in Burgess Hill before we price.
- Smoke alarms on every storey with living accommodation and CO alarms by fixed combustion appliances (other than gas cookers) are required by law.
- Mandatory HMO licence for 5 or more people in 2 or more households (since October 2018); councils can add additional licensing for smaller HMOs.
- Electrical installations must be inspected and tested at least every 5 years; remedial work is due within 28 days, or sooner if the report says so.
- The Fire Safety Order 2005 applies to the common parts of HMOs, enforced by the fire and rescue authority.
How much do fire alarm and detection systems cost in Burgess Hill?
| Item | UK typical | Local guide | Per |
|---|---|---|---|
| Interlinked mains alarm system (Grade D type), small HMO (our estimate from installer guides) | £800 – £2,000 | £900 – £2,250 | house |
| Panel alarm system (Grade A type), larger HMO | £1,750 – £4,500 | £1,950 – £5,050 | house |
| Emergency light fitting, installed (our estimate) | £150 – £350 | £170 – £390 | fitting |
Use these as a starting point for budgeting. Access, condition and the council’s requirements in Burgess Hill can move the figure either way, which is why we quote after seeing the house.
How long does it take?
Typical time on site: 1–4 working days. We agree the programme with you before starting and send photo updates as the work progresses.
When do Burgess Hill landlords need it?
Typical reasons for this work in Burgess Hill:
- Adding rooms or converting to an HMO
- A licence condition or inspection finding
Questions about fire alarm and detection systems in Burgess Hill
Are battery smoke alarms enough?
For most HMOs, no. Interlinked mains-powered detection is usually expected so everyone is warned wherever the fire starts.
Which postcodes in Burgess Hill do you work in?
All of them, including BN6, RH15 and RH17, and the surrounding parts of West Sussex.
Does a shared house in Burgess Hill need an HMO licence?
In England, a mandatory licence is needed for 5 or more people from 2 or more households. Smaller HMOs can need a licence where the council runs additional licensing, which is common in towns with many shared houses. Check the council’s website for the address.
How much do fire alarm and detection systems cost in Burgess Hill?
Our guide ranges for South East are in the table on this page, and the guide-price tool gives a figure for your house. A fixed written quote follows a free site visit.
Fire alarm and detection systems near Burgess Hill
- Haywards Heath · 3 mi
- Portslade · 9 mi
- Hove · 9 mi
- Brighton · 9 mi
- Rottingdean · 11 mi
- Crawley · 11 mi
- All of West Sussex
Other HMO services in Burgess Hill
- HMO fire safety upgrades in Burgess Hill
- Escape routes, emergency lighting and fire stopping in Burgess Hill
- Fire doors in Burgess Hill
- Rewires and EICR remedials in Burgess Hill
- Licence condition and schedule-of-works in Burgess Hill
- House to HMO conversion in Burgess Hill
- Damp, mould and HHSRS repairs in Burgess Hill
- Bedroom upgrades and room refits in Burgess Hill