An HMO fire alarm is an interlinked system of smoke and heat detectors that sounds everywhere in the house when one detector triggers. For a house in Brixton we start with a measured survey, check the council’s written HMO standards for the number of sharers, and then price each item separately.
- Area
- Greater London, England
- Postcodes
- SW2, SW4 and SW9
- Location
- 3 miles south of London
- Pricing region
- London
What do fire alarm and detection systems in Brixton involve?
- User instructions and a logbook
- Mains-wired interlinked smoke and heat detectors
- Carbon monoxide alarms where needed
- Detection in rooms, kitchens and escape routes as specified
- Maintenance and testing visits
Which rules apply in Brixton?
Here is what usually applies to a Brixton job of this kind. It is general information rather than legal advice, and the council’s written HMO standards have the final detail.
- Smoke alarms on every storey with living accommodation and CO alarms by fixed combustion appliances (other than gas cookers) are required by law.
- Licences last up to 5 years and carry conditions on gas and electrical safety, alarms, room sizes and waste.
- Electrical installations must be inspected and tested at least every 5 years; remedial work is due within 28 days, or sooner if the report says so.
- The Fire Safety Order 2005 applies to the common parts of HMOs, enforced by the fire and rescue authority.
How much do fire alarm and detection systems cost in Brixton?
| Item | UK typical | Local guide | Per |
|---|---|---|---|
| Interlinked mains alarm system (Grade D type), small HMO (our estimate from installer guides) | £800 – £2,000 | £1,000 – £2,550 | house |
| Panel alarm system (Grade A type), larger HMO | £1,750 – £4,500 | £2,250 – £5,750 | house |
| Emergency light fitting, installed (our estimate) | £150 – £350 | £190 – £450 | fitting |
Prices in Brixton are shown with our regional adjustment for London (above the UK average). Your quote is itemised and fixed in writing once the scope and specification are agreed.
How long does it take?
Typical time on site: 1–4 working days. We agree the programme with you before starting and send photo updates as the work progresses.
When do Brixton landlords need it?
Typical reasons for this work in Brixton:
- Adding rooms or converting to an HMO
- No alarm, or battery-only alarms
Questions about fire alarm and detection systems in Brixton
What grade of fire alarm does an HMO need?
There is no single answer in law. Guidance links the grade and coverage to the size of the house and the risk, and your fire risk assessment and council will set it. We install to that specification.
Do you cover all of Brixton?
Yes. We work across Brixton and the SW2, SW4 and SW9 postcode areas, plus the rest of Greater London. Nearby places we also cover include Peckham, Pimlico, Battersea.
Where do I check the HMO rules for an address in Brixton?
With the local council for the address. Councils in England can add additional licensing and Article 4 directions on top of the national rules. Check the council’s website for the exact address before you buy or start work.
How much do fire alarm and detection systems cost in Brixton?
Our guide ranges for London are in the table on this page, and the guide-price tool gives a figure for your house. A fixed written quote follows a free site visit.
Fire alarm and detection systems near Brixton
- Peckham · 2 mi
- Pimlico · 2 mi
- Battersea · 2 mi
- City of Westminster · 3 mi
- Streatham · 3 mi
- London · 3 mi
- All of Greater London
Other HMO services in Brixton
- HMO fire safety upgrades in Brixton
- Escape routes, emergency lighting and fire stopping in Brixton
- Fire doors in Brixton
- Rewires and EICR remedials in Brixton
- Licence condition and schedule-of-works in Brixton
- House to HMO conversion in Brixton
- Commercial and above-shop to HMO in Brixton
- Communal kitchen refits in Brixton