An HMO fire alarm is an interlinked system of smoke and heat detectors that sounds everywhere in the house when one detector triggers. Landlords in Hyde (SK14) usually come to us with a council letter, a fire risk assessment or a house they have just bought. We price from whichever you have.
- Area
- Greater Manchester, England
- Postcodes
- SK14
- Location
- 7 miles east of Manchester
- Pricing region
- North West
What do fire alarm and detection systems in Hyde involve?
- Commissioning and certificate
- Carbon monoxide alarms where needed
- Maintenance and testing visits
- Survey and system design to the fire risk assessment
- Detection in rooms, kitchens and escape routes as specified
Which rules apply in Hyde?
The rules below are the England-wide position for this kind of work. Councils add their own standards and schemes on top, so we always check the address in Hyde before we price.
- The Fire Safety Order 2005 applies to the common parts of HMOs, enforced by the fire and rescue authority.
- Mandatory HMO licence for 5 or more people in 2 or more households (since October 2018); councils can add additional licensing for smaller HMOs.
- Electrical installations must be inspected and tested at least every 5 years; remedial work is due within 28 days, or sooner if the report says so.
- Smoke alarms on every storey with living accommodation and CO alarms by fixed combustion appliances (other than gas cookers) are required by law.
How much do fire alarm and detection systems cost in Hyde?
| Item | UK typical | Local guide | Per |
|---|---|---|---|
| Interlinked mains alarm system (Grade D type), small HMO (our estimate from installer guides) | £800 – £2,000 | £770 – £1,900 | house |
| Panel alarm system (Grade A type), larger HMO | £1,750 – £4,500 | £1,700 – £4,300 | house |
| Emergency light fitting, installed (our estimate) | £150 – £350 | £140 – £340 | fitting |
These are typical ranges including VAT, adjusted for North West, where costs run below the UK average. The fixed price for a house in Hyde follows a site visit.
How long does it take?
Most jobs of this kind take 1–4 working days. If a council deadline applies in Hyde, tell us at the first call so the programme is built around it.
When do Hyde landlords need it?
We usually get the call when:
- A licence condition or inspection finding
- No alarm, or battery-only alarms
Questions about fire alarm and detection systems in Hyde
How often should the alarm be tested?
Guidance usually asks for regular user tests and periodic servicing by a competent person. We can set up a maintenance schedule.
How far do you travel from Hyde?
We cover the whole of Greater Manchester and work UK-wide. For Hyde the nearest towns on our list are Denton (2 miles), Dukinfield (2 miles), Stalybridge (2 miles).
Where do I check the HMO rules for an address in Hyde?
With the local council for the address. Councils in England can add additional licensing and Article 4 directions on top of the national rules. Check the council’s website for the exact address before you buy or start work.
How much do fire alarm and detection systems cost in Hyde?
Our guide ranges for North West are in the table on this page, and the guide-price tool gives a figure for your house. A fixed written quote follows a free site visit.
Fire alarm and detection systems near Hyde
- Denton · 2 mi
- Dukinfield · 2 mi
- Stalybridge · 2 mi
- Ashton-under-Lyne · 3 mi
- Droylsden · 3 mi
- Stockport · 4 mi
- All of Greater Manchester