An HMO fire alarm is an interlinked system of smoke and heat detectors that sounds everywhere in the house when one detector triggers. Landlords in Wigan (WN1, WN2 and WN3) usually come to us with a council letter, a fire risk assessment or a house they have just bought. We price from whichever you have.
- Area
- Greater Manchester, England
- Postcodes
- WN1, WN2 and WN3
- Location
- 15 miles south of Preston
- Pricing region
- North West
What do fire alarm and detection systems in Wigan involve?
- Maintenance and testing visits
- Commissioning and certificate
- Survey and system design to the fire risk assessment
- User instructions and a logbook
- Detection in rooms, kitchens and escape routes as specified
Which rules apply in Wigan?
Here is what usually applies to a Wigan job of this kind. It is general information rather than legal advice, and the council’s written HMO standards have the final detail.
- Fire precautions follow a risk assessment; the LACORS Housing – Fire Safety guide (2008) is guidance, not law, but many councils base their standards on it.
- Mandatory HMO licence for 5 or more people in 2 or more households (since October 2018); councils can add additional licensing for smaller HMOs.
- Electrical installations must be inspected and tested at least every 5 years; remedial work is due within 28 days, or sooner if the report says so.
- Smoke alarms on every storey with living accommodation and CO alarms by fixed combustion appliances (other than gas cookers) are required by law.
How much do fire alarm and detection systems cost in Wigan?
| Item | UK typical | Local guide | Per |
|---|---|---|---|
| Interlinked mains alarm system (Grade D type), small HMO (our estimate from installer guides) | £800 – £2,000 | £770 – £1,900 | house |
| Panel alarm system (Grade A type), larger HMO | £1,750 – £4,500 | £1,700 – £4,300 | house |
| Emergency light fitting, installed (our estimate) | £150 – £350 | £140 – £340 | fitting |
Use these as a starting point for budgeting. Access, condition and the council’s requirements in Wigan can move the figure either way, which is why we quote after seeing the house.
How long does it take?
Allow 1–4 working days on site for a typical job. Drawings, approvals and long-lead items such as kitchens or fire door sets are booked before we start.
When do Wigan landlords need it?
Typical reasons for this work in Wigan:
- No alarm, or battery-only alarms
- A licence condition or inspection finding
Questions about fire alarm and detection systems in Wigan
Do you give a certificate?
Yes: design, installation and commissioning certificates for the system we fit.
Do you cover all of Wigan?
Yes. We work across Wigan and the WN1, WN2 and WN3 postcode areas, plus the rest of Greater Manchester. Nearby places we also cover include Hindley, Ashton in Makerfield, Westhoughton.
Does a shared house in Wigan need an HMO licence?
In England, a mandatory licence is needed for 5 or more people from 2 or more households. Smaller HMOs can need a licence where the council runs additional licensing, which is common in towns with many shared houses. Check the council’s website for the address.
How much do fire alarm and detection systems cost in Wigan?
Our guide ranges for North West are in the table on this page, and the guide-price tool gives a figure for your house. A fixed written quote follows a free site visit.
Fire alarm and detection systems near Wigan
- Hindley · 2 mi
- Ashton in Makerfield · 4 mi
- Westhoughton · 5 mi
- Golborne · 5 mi
- Skelmersdale · 6 mi
- Leigh · 6 mi
- All of Greater Manchester
Other HMO services in Wigan
- HMO fire safety upgrades in Wigan
- Escape routes, emergency lighting and fire stopping in Wigan
- Fire doors in Wigan
- Rewires and EICR remedials in Wigan
- Licence condition and schedule-of-works in Wigan
- House to HMO conversion in Wigan
- Layout changes and room reconfiguration in Wigan
- Professional and co-living HMO refurbs in Wigan
