An HMO fire alarm is an interlinked system of smoke and heat detectors that sounds everywhere in the house when one detector triggers. Burngreave is 1 miles north-east of Sheffield. We price fire alarm and detection systems there against England’s HMO rules and the council’s written HMO standards, so work is planned to the standard an inspection looks for.
- Area
- South Yorkshire, England
- Postcodes
- S1, S2, S3 and S4
- Location
- 1 miles north-east of Sheffield
- Pricing region
- Yorkshire and the Humber
What do fire alarm and detection systems in Burngreave involve?
- User instructions and a logbook
- Detection in rooms, kitchens and escape routes as specified
- Carbon monoxide alarms where needed
- Commissioning and certificate
- Mains-wired interlinked smoke and heat detectors
Which rules apply in Burngreave?
Fire alarm and detection systems in Burngreave must satisfy national law for England, the council’s written HMO standards and, where walls, drainage or fire separation change, the building rules. In short:
- Smoke alarms on every storey with living accommodation and CO alarms by fixed combustion appliances (other than gas cookers) are required by law.
- Mandatory HMO licence for 5 or more people in 2 or more households (since October 2018); councils can add additional licensing for smaller HMOs.
- BS 7671, the wiring standard, calls for arc fault detection devices in HMOs on new socket circuits, such as rewires and consumer unit changes.
- The Fire Safety Order 2005 applies to the common parts of HMOs, enforced by the fire and rescue authority.
How much do fire alarm and detection systems cost in Burngreave?
| Item | UK typical | Local guide | Per |
|---|---|---|---|
| Interlinked mains alarm system (Grade D type), small HMO (our estimate from installer guides) | £800 – £2,000 | £760 – £1,900 | house |
| Panel alarm system (Grade A type), larger HMO | £1,750 – £4,500 | £1,650 – £4,300 | house |
| Emergency light fitting, installed (our estimate) | £150 – £350 | £140 – £330 | fitting |
These are typical ranges including VAT, adjusted for Yorkshire and the Humber, where costs run below the UK average. The fixed price for a house in Burngreave follows a site visit.
How long does it take?
Allow 1–4 working days on site for a typical job. Drawings, approvals and long-lead items such as kitchens or fire door sets are booked before we start.
When do Burngreave landlords need it?
We usually get the call when:
- A licence condition or inspection finding
- No alarm, or battery-only alarms
Questions about fire alarm and detection systems in Burngreave
Are battery smoke alarms enough?
For most HMOs, no. Interlinked mains-powered detection is usually expected so everyone is warned wherever the fire starts.
How far do you travel from Burngreave?
We cover the whole of South Yorkshire and work UK-wide. For Burngreave the nearest towns on our list are Sheffield (1 miles), Rotherham (5 miles), Chapeltown (5 miles).
Where do I check the HMO rules for an address in Burngreave?
With the local council for the address. Councils in England can add additional licensing and Article 4 directions on top of the national rules. Check the council’s website for the exact address before you buy or start work.
How much do fire alarm and detection systems cost in Burngreave?
Our guide ranges for Yorkshire and the Humber are in the table on this page, and the guide-price tool gives a figure for your house. A fixed written quote follows a free site visit.
Fire alarm and detection systems near Burngreave
- Sheffield · 1 mi
- Rotherham · 5 mi
- Chapeltown · 5 mi
- Dronfield · 6 mi
- Staveley · 10 mi
- Chesterfield · 10 mi
- All of South Yorkshire
Other HMO services in Burngreave
- HMO fire safety upgrades in Burngreave
- Escape routes, emergency lighting and fire stopping in Burngreave
- Fire doors in Burngreave
- Rewires and EICR remedials in Burngreave
- Licence condition and schedule-of-works in Burngreave
- House to HMO conversion in Burngreave
- Extensions for extra rooms in Burngreave
- Large HMO conversions (7+ sharers) in Burngreave