HMO layout reconfiguration changes the internal plan of a shared house so the rooms, kitchens and bathrooms work together: moving or adding walls, splitting oversized rooms, merging undersized ones, or moving the kitchen off the escape route. For a house in Battersea we start with a measured survey, check the council’s written HMO standards for the number of sharers, and then price each item separately.
- Area
- Greater London, England
- Postcodes
- SW8 and SW11
- Location
- 3 miles south-west of London
- Pricing region
- London
What do layout changes and room reconfiguration in Battersea involve?
- Fire separation for new rooms
- Making good and decoration
- Merging undersized rooms
- Measured survey and options drawings
- New stud walls and door openings
Which rules apply in Battersea?
Here is what usually applies to a Battersea job of this kind. It is general information rather than legal advice, and the council’s written HMO standards have the final detail.
- Licensed HMOs must meet national minimum bedroom sizes: 6.51 m² for one person aged 10 or over, 10.22 m² for two, and 4.64 m² for a child under 10.
- The Fire Safety Order 2005 applies to the common parts of HMOs, enforced by the fire and rescue authority.
- A conversion can be a material change of use under the building regulations, so confirm with building control before work starts.
- Council standards often step up at 5 and 6 sharers, for example a separate WC at 5 and a second bathroom from 6.
How much do layout changes and room reconfiguration cost in Battersea?
| Item | UK typical | Local guide | Per |
|---|---|---|---|
| New stud wall and door forming a room, per room (our estimate) | £1,500 – £3,500 | £1,900 – £4,500 | room formed |
| Conversion works per letting room (walls, linings, electrics, decoration; excludes kitchens, bathrooms and fire systems; our estimate) | £3,500 – £6,500 | £4,500 – £8,300 | letting room |
Use these as a starting point for budgeting. Access, condition and the council’s requirements in Battersea can move the figure either way, which is why we quote after seeing the house.
How long does it take?
Typical time on site: 1–4 weeks. We agree the programme with you before starting and send photo updates as the work progresses.
When do Battersea landlords need it?
Landlords in Battersea most often ask us for this when:
- Rooms below the size standard
- A kitchen on the escape route
Questions about layout changes and room reconfiguration in Battersea
Do I need building control for new walls?
Non-structural partitions often do not on their own, but changes affecting fire safety, structure or drainage usually do. In an HMO conversion they are normally part of the building control application.
How far do you travel from Battersea?
We cover the whole of Greater London and work UK-wide. For Battersea the nearest towns on our list are Chelsea (1 miles), Pimlico (1 miles), City of Westminster (2 miles).
Does a shared house in Battersea need an HMO licence?
In England, a mandatory licence is needed for 5 or more people from 2 or more households. Smaller HMOs can need a licence where the council runs additional licensing, which is common in towns with many shared houses. Check the council’s website for the address.
How much do layout changes and room reconfiguration cost in Battersea?
Our guide ranges for London are in the table on this page, and the guide-price tool gives a figure for your house. A fixed written quote follows a free site visit.
Layout changes and room reconfiguration near Battersea
- Chelsea · 1 mi
- Pimlico · 1 mi
- City of Westminster · 2 mi
- Fulham · 2 mi
- Brixton · 2 mi
- London · 3 mi
- All of Greater London
Other HMO services in Battersea
- House to HMO conversion in Battersea
- Extensions for extra rooms in Battersea
- Loft conversions for extra rooms in Battersea
- Ensuite installation in Battersea
- Communal kitchen refits in Battersea
- Escape routes, emergency lighting and fire stopping in Battersea
- Fire alarm and detection systems in Battersea
- EPC and energy upgrades in Battersea