- Nation
- England
- Pricing region
- South East
- Postcode areas
- TN, CT, ME, DA
- Main towns
- Saint Peters, Maidstone, Gillingham, Chatham, Royal Tunbridge Wells
What do shared bathroom and shower room refits in Kent involve?
- Separate WC where the ratio needs it
- Strip-out and repairs to floors and walls
- Tanking and waterproofing
- Thermostatic shower and bath or walk-in shower
- Slip-resistant flooring
- Extractor fan with humidistat or overrun
Which rules apply in Kent?
- Council standards often step up at 5 and 6 sharers, for example a separate WC at 5 and a second bathroom from 6.
- Councils assess hazards, including damp, mould and fire, under the HHSRS; revised regulations and guidance applied from 23 June 2026.
- BS 7671, the wiring standard, calls for arc fault detection devices in HMOs on new socket circuits, such as rewires and consumer unit changes.
- Councils can fine up to £7,000 where a Category 1 hazard is not removed when it reasonably could have been.
Councils in England can add additional licensing and Article 4 directions on top of the national rules. Check the council’s website for the exact address before you buy or start work.
How much do shared bathroom and shower room refits cost in Kent?
| Item | UK typical | Local guide | Per |
|---|---|---|---|
| Shared bathroom refit | £5,500 – £9,000 | £6,150 – £10,100 | bathroom |
| Ensuite shower room added to a bedroom | £4,000 – £10,000 | £4,500 – £11,200 | ensuite |
| Mould treatment and making good | £250 – £500 | £280 – £560 | room |
Typical time on site: 5–10 working days. For a figure for your house, try the guide-price tool.
Shared bathroom and shower room refits by town in Kent
- Saint Peters
- Maidstone
- Gillingham
- Chatham
- Royal Tunbridge Wells
- Folkestone
- Margate
- Ashford (Kent)
- Canterbury
- Sittingbourne
- Gravesend
- Dartford
- Ramsgate
- Dover
- Tonbridge
- Strood
- Whitstable
- Deal
- Sevenoaks
- Rochester
- Herne Bay
- Broadstairs
- Faversham
- Swanley
Questions about shared bathroom and shower room refits in Kent
How many bathrooms does my HMO need?
The national test is adequacy; councils usually set a ratio, often one bathroom per five sharers, with an extra WC in some cases. We check your council’s figure.
What stops mould in shared bathrooms?
Good extraction that keeps running after use, some background heat and finishes that do not trap moisture. We fit all three.
Do you carry out shared bathroom and shower room refits across Kent?
Yes, across the whole of Kent, including Saint Peters, Maidstone, Gillingham.
Who licenses HMOs in Kent?
HMOs in Kent are licensed by the local council for the address. Where an area has several councils, each runs its own licensing and planning policies.