Damp and mould in an HMO is usually caused by condensation, leaks or rising or penetrating damp, and often by a mix. Yate is 10 miles north-east of Bristol. We price damp, mould and HHSRS repairs there against England’s HMO rules and the council’s written HMO standards, so work is planned to the standard an inspection looks for.
- Area
- Gloucestershire, England
- Postcodes
- BS37
- Location
- 10 miles north-east of Bristol
- Pricing region
- South West
What do damp, mould and HHSRS repairs in Yate involve?
- Photo report of before and after
- Leak, gutter and roof repairs
- Damp-proofing where it is the cause
- Extraction and continuous ventilation
- Mould treatment and stain-block
Which rules apply in Yate?
Here is what usually applies to a Yate job of this kind. It is general information rather than legal advice, and the council’s written HMO standards have the final detail.
- Councils can fine up to £7,000 where a Category 1 hazard is not removed when it reasonably could have been.
- Rented homes must currently meet at least EPC E, with a £3,500 spending cap. The government plans EPC C by October 2030, subject to legislation.
How much do damp, mould and HHSRS repairs cost in Yate?
| Item | UK typical | Local guide | Per |
|---|---|---|---|
| Damp repair, from a single wall to a whole house | £600 – £4,000 | £620 – £4,150 | job |
| Mould treatment and making good | £250 – £500 | £260 – £520 | room |
Use these as a starting point for budgeting. Access, condition and the council’s requirements in Yate can move the figure either way, which is why we quote after seeing the house.
How long does it take?
Typical time on site: 2–10 working days. We agree the programme with you before starting and send photo updates as the work progresses.
When do Yate landlords need it?
Typical reasons for this work in Yate:
- An HHSRS finding or council letter
- Tenant reports of damp or mould
Questions about damp, mould and HHSRS repairs in Yate
Is damp always rising damp?
No. In shared houses condensation is the most common cause, because of cooking, showers and drying clothes. We find the cause before recommending any treatment.
Do you cover all of Yate?
Yes. We work across Yate and the BS37 postcode areas, plus the rest of Gloucestershire. Nearby places we also cover include Mangotsfield, Kingswood, Bristol.
Where do I check the HMO rules for an address in Yate?
With the local council for the address. Councils in England can add additional licensing and Article 4 directions on top of the national rules. Check the council’s website for the exact address before you buy or start work.
How much do damp, mould and HHSRS repairs cost in Yate?
Our guide ranges for South West are in the table on this page, and the guide-price tool gives a figure for your house. A fixed written quote follows a free site visit.
Damp, mould and HHSRS repairs near Yate
- Mangotsfield · 5 mi
- Kingswood · 7 mi
- Bristol · 10 mi
- Bath · 12 mi
- Chippenham · 14 mi
- Portishead · 16 mi
- All of Gloucestershire
Other HMO services in Yate
- Shared bathroom and shower room refits in Yate
- EPC and energy upgrades in Yate
- Full HMO refurbishment in Yate
- Void and between-tenancy refurbs in Yate
- Licence condition and schedule-of-works in Yate
- Communal kitchen refits in Yate
- Bedroom upgrades and room refits in Yate
- Layout changes and room reconfiguration in Yate