An HMO fire alarm is an interlinked system of smoke and heat detectors that sounds everywhere in the house when one detector triggers. Barnstaple is 34 miles north-west of Exeter. We price fire alarm and detection systems there against England’s HMO rules and the council’s written HMO standards, so work is planned to the standard an inspection looks for.
- Area
- Devon, England
- Postcodes
- EX31 and EX32
- Location
- 34 miles north-west of Exeter
- Pricing region
- South West
What do fire alarm and detection systems in Barnstaple involve?
- Commissioning and certificate
- Carbon monoxide alarms where needed
- Panel systems for larger HMOs
- Detection in rooms, kitchens and escape routes as specified
- User instructions and a logbook
Which rules apply in Barnstaple?
Here is what usually applies to a Barnstaple job of this kind. It is general information rather than legal advice, and the council’s written HMO standards have the final detail.
- Smoke alarms on every storey with living accommodation and CO alarms by fixed combustion appliances (other than gas cookers) are required by law.
- Mandatory HMO licence for 5 or more people in 2 or more households (since October 2018); councils can add additional licensing for smaller HMOs.
- BS 7671, the wiring standard, calls for arc fault detection devices in HMOs on new socket circuits, such as rewires and consumer unit changes.
- The Fire Safety Order 2005 applies to the common parts of HMOs, enforced by the fire and rescue authority.
How much do fire alarm and detection systems cost in Barnstaple?
| Item | UK typical | Local guide | Per |
|---|---|---|---|
| Interlinked mains alarm system (Grade D type), small HMO (our estimate from installer guides) | £800 – £2,000 | £830 – £2,100 | house |
| Panel alarm system (Grade A type), larger HMO | £1,750 – £4,500 | £1,800 – £4,700 | house |
| Emergency light fitting, installed (our estimate) | £150 – £350 | £160 – £360 | fitting |
Use these as a starting point for budgeting. Access, condition and the council’s requirements in Barnstaple can move the figure either way, which is why we quote after seeing the house.
How long does it take?
Most jobs of this kind take 1–4 working days. If a council deadline applies in Barnstaple, tell us at the first call so the programme is built around it.
When do Barnstaple landlords need it?
Typical reasons for this work in Barnstaple:
- Adding rooms or converting to an HMO
- A licence condition or inspection finding
Questions about fire alarm and detection systems in Barnstaple
Do you give a certificate?
Yes: design, installation and commissioning certificates for the system we fit.
How far do you travel from Barnstaple?
We cover the whole of Devon and work UK-wide. For Barnstaple the nearest towns on our list are Bideford (8 miles), Tiverton (28 miles), Porthcawl (32 miles).
Does a shared house in Barnstaple need an HMO licence?
In England, a mandatory licence is needed for 5 or more people from 2 or more households. Smaller HMOs can need a licence where the council runs additional licensing, which is common in towns with many shared houses. Check the council’s website for the address.
How much do fire alarm and detection systems cost in Barnstaple?
Our guide ranges for South West are in the table on this page, and the guide-price tool gives a figure for your house. A fixed written quote follows a free site visit.
Fire alarm and detection systems near Barnstaple
- Bideford · 8 mi
- Tiverton · 28 mi
- Porthcawl · 32 mi
- Llantwit Major · 34 mi
- Exeter · 34 mi
- Pyle · 34 mi
- All of Devon
Other HMO services in Barnstaple
- HMO fire safety upgrades in Barnstaple
- Escape routes, emergency lighting and fire stopping in Barnstaple
- Fire doors in Barnstaple
- Rewires and EICR remedials in Barnstaple
- Licence condition and schedule-of-works in Barnstaple
- House to HMO conversion in Barnstaple
- Loft conversions for extra rooms in Barnstaple
- Ensuite installation in Barnstaple